Retro Rifles

M16/M16A1 Front Sight Post

Modern production Colt A1 front sight post. 2 options for post Size: Thin Post- Original M16 Wi

Retro Rifles

Pistol Grip - Original Colt M16 / A1

We offer 5 different grades of authentic Colt M16 Pistol Grips: A1 New (Not Colt) Black, Refurbi

Retro Rifles

M16 Sling - New

Color Choices: Black Green Coyote Brown New New reproduction Sling are all USA materials

Retro Rifles

Barrel Nut

  Original Colt M16 Barrel Nut. Used, Take Off part from old guns. Mil Spec  

Retro Rifles

Pistol Grip - M16A2 & M4

A2 Pistol Grip. Correct for all build versions after 1987.

Retro Rifles

A1 Rear Sight Assembly - Original Colt Parts from M16A1

Complete rear sight assembly for all Colt AR-15 / M16 models before the introduction of the A2 sight

M16A2 Flash Hiders

Standard A2 Flash Suppressor. Correct for all builds after approximately 1984-1988 (depending on bra

Retro Rifles

M16/M16A2/M4 Front Sight Post

M16A2 Front Sight Post. Also known as an "A2" or "M4" Post (depending on which height)   This

30 Round pouch (ALICE) magazine carrier

Surplus 30 round USGI magazine pouch Standard ALICE Pouch hold 2 grenades on each side   &nb

Front Handguard Cap - 5 styles

Triangle caps are mostly for M16A1 triangle handguards. They can often be used with later A2 round h

M16 M16A1 Operator's Manual

Reproduction M16 M16A1 Operator's Manual.

Sling Swivel - Front and Rear

Sling Swivel for front and rear   New Production Battlefield Used no rubber   &n

Retro Rifles

CAR-15 Buttstock - "FiberLite" full Assembly - Colt / Diemaco / XM177/ Commando / C8

A nice reproduction of the Colt/Diemaco FiberLite stock. Colors;  Black Green Strippe

Retro Rifles

Pistol Grip - Original Colt M16 / A1

We offer 5 different grades of authentic Colt M16 Pistol Grips: A1 New (Not Colt) Black, Refurbi

Retro Rifles

Duck Bill & 3 Prong Flash Hiders (1960-1983)

The first Model AR15 (Model 601) had what is often called a "Duck Bill" Flash Suppressor. It was the

Retro Rifles

Carbine Handguards - 5 Options

  CAR-15/ XM177  6 Hole Handguards: New reproductions of original round Car-15 handguard

Front Sight Base

Front Sight Base (FSB) for all fix sight US Military M16 versions.   To get the right version

Retro Rifles

Lock Washer / Peel washer / Crush washer

The US Military has used three different types of washers to keep a muzzle device in place: - Lock

Retro Rifles

20" Pencil Barrel - AR-15 / XM16E1 / M16 / M16A1

This "Pencil" profile Chrome lined barrel is the same size and finish as the original AR-15, XM16E1,

Retro Rifles

Moderator Flash Hiders - CAR-15 / XM177E1 / XM177E2 / Colt Commando (1963-1974)

We offer 5 different versions of the CAR-15 "Moderator" muzzle device. The first three choices are a

Retro Rifles

M16 Sling - New

Color Choices: Black Green Coyote Brown New New reproduction Sling are all USA materials

Forward Assist

All 4 types of Forward Assists used by the US military: Teardrop (1963-1982) Large Round- Modifi

Retro Rifles

Triangle Handguards - Polymer / AR-15 / XM16E1 / M16 / M16A1

AR15 Triangle handguards, Polymer, New Production. This is NOT the same mold being sold by other ve

Front Handguard Cap - 5 styles

Triangle caps are mostly for M16A1 triangle handguards. They can often be used with later A2 round h

Waterproof Hard Case

Interior (L x W x D) 7.46" x 4.96" x 3.33" (18.9 x 12.6 x 8.5 cm) Exterior(L x W x D) 8.41" x 6.76"

The M16A1 Rifle: Operation & Preventative Maintenance - (Vietnam Comic Book)

"The M16A1 Rifle: Operation & Preventative Maintenance" Reproduction of the Original comic book

Colt 607 Rear Handguard Cap

The Colt 607 was the first attempt at making a submachine gun version of the M16 rifle. Few were mad

Cold Steel 18" Spear Point Machete

Original Cold Steel 18" Spear Point Machete with soft rubber handle. 1/3 length of the top of the b

M16A2 Rifle Stock Spacer - Mil spec

The original M16 had about a 13.25" length-of-pull. The M16A2 had a butt stock about an inch longer

Barrel Nut Snap Ring

Mil Spec Barrel Nut Snap Ring (One of Four parts comprising the Barrel Nut Assembly).   The o

Weldon Spring

Weldon Spring for Barrel Nut Assembly. Mil spec.   The other 3 parts of the Barrel Nut Assemb

Rear Sling Swivel Roll Pin ( AR15 / M16 / M16A1)

Rear Sling Swivel Roll Pins There are Two Roll Pins used in the Rear Sling Swivel Assembly: - One

Rear Sling Swivel Stud ( AR15 / M16 / M16A1)

Rear Sling Swivel Stud for early generation AR15 / M16's with the rubber butt plate. Will not fit M1

Retro Rifles

M16A2 / M4 Rear Sight Aperture (Flip)

This is the correct flip Aperture for all Colt models starting with the M16A2 onward. This would inc

Retro Rifles

Rear Sight Flat Spring ( AR15 / M16 / M16A1 / M16A2 / M4 )

Flat Spring for the AR15 / M16 / M16A1 / M16A2 Rear Sight Assembly. Only the Flat Spring is include

Retro Rifles

Rear Sight Roll Pin ( AR15 / M16 / M16A1)

Roll Pin holding the Rear Windage Drum of the AR15 / M16 / M16A1 in place. Will not work on M16A2 S