74 results for 'model'

Retro Rifles

Colt Model 607 3.5 Inch Moderator

Gen 1 - 3.5 inch, no slots.. used on the Survival Rifle and first model CAR-15 shorty (colt model 60

Colt model 653 / 654 / SP1 Carbine

The second (and final) Carbine model on the M16A1 Upper Receiver. Used by Alias and Barns in the mov

Retro Rifles

Slip Ring / Delta Ring - All USGI Colt Models

Standard on all Colt Models from the beginning of the AR15 story in 1960 up until replacement by the

Retro Rifles

Colt 602 / 604 - second model AR-15 (1963-1964)

  May take up to 12 weeks for build and ship 1:12 Twist currently only barrel available. We a

Sling Swivel - Front and Rear - All USGI Colt Models

Front and Rear Sling Swivel for all US Military models of the AR15 / M16 platform.   Notes on

Retro Rifles

Colt M16A1 , model 603 (1967-1983)

In 1967 the Colt 603 XM16E1 officially became the Colt 603 M16A1, and remained so until the mid-1980

Cold Steel Sure Flight Thrower - 1st Model - Carbon V steel

Cold Steel Sure Flight Thrower - 1st Model - Carbon V steel Large size - 14 inches overall length

Colt Model 723 Carbine Upper Assembly

This is Larry Vicker's M4 Carbine he used in Delta.   3 Barrel Options: 14.5 Inch 1/7 Twis

Retro Rifles

Colt 601 - First model AR-15 Project Agile (1960-1962)

May take up to 12 weeks for build and ship 1:12 Twist currently only barrel available. We are worki

Forward Assist Spring - ( All Forward Assist models )

Forward Assist Spring for all version assists (Teardrop, Large round, current Small Round, etc.) &n

M16 Gas Tubes - All models AR15 / M16

Standard Stainless Steel AR15 / M16 Gas tubes.   Four Sizes available, based on Gas Port leng

Retro Rifles

11.5 inch Colt model 733 / M4 Commando / XM177E2 barrel (.625)

This is one of the hardest Barrels to find.. and so many different Builds can be made with this Barr

Rear Sling Swivel Assembly - for early Rubber Buttpad Stocks (Colt model 601, 602, 604)

Sling Swivel Assembly for AR15 / M16 with original Rubber Buttpad Buttstock. ** These will not work

Forward Assist Roll Pin ( All Forward Assist models)

Forward Assist Roll Pin for all version assists (Teardrop, Large round, current Small Round, etc.)

M16 Gas Tube PINS- All models AR15 / M16

Standard Stainless Steel AR15 / M16 Gas tubes.   Will Work on: Rifle length Mid-length C

Retro Rifles

Colt XM177E2 / GAU-5A/A / CAR-15 / model 629, 630 Commando / US Air Force (1967-1970)

In 1966, the Army decided it wanted a slightly longer barreled version of the XM177E1, 11.5 inches i

Retro Rifles

Rifle length Buffer Spring - All fixed Rifle Stock models

Correct for all Rifle length Stock builds - A1, A2, C7, etc.   Made in the USA Lifetime Guar

Trigger Spring - AR15 / M16 / M4

Trigger Spring for all USGI model AR15 / M16 models. Note: Both Semi and Full Auto Triggers use the

Retro Rifles

3 Prong Flash Hiders (1960-1983) 223/ 5.56

The first Model AR15 (Model 601) had what is often called a "Duck Bill" Flash Suppressor. It was the

Retro Rifles

Banned State Duck Bill Flash Hiders (1960-1983) 223/ 5.56

The first Model AR15 (Model 601) had what is often called a "Duck Bill" Flash Suppressor. It was the

Retro Rifles

Duck Bill Flash Hiders (1960-1983) 223/ 5.56

The first Model AR15 (Model 601) had what is often called a "Duck Bill" Flash Suppressor. It was the

Retro Rifles

Banned State 3 Prong Flash Hiders (1960-1983) 223/ 5.56

The first Model AR15 (Model 601) had what is often called a "Duck Bill" Flash Suppressor. It was the

Front Handguard Cap - 5 Styles

Handguard Caps hold the front of the two pieces of the handguard to the barrel assembly. (The rear o

Retro Rifles

M16A2/ M4 Upper Receiver

2 Options Available: Stripped Assembly: Comes with rear sights, dust cover, and forward assist

Colt

Rear Sight Detent ( AR15 / M16 / M16A1)

Detent for the Rear Sight Assembly for all model AR15's BEFORE the M16A2. This would include AR15 /

Rear Sling Swivel Stud ( AR15 / M16 / M16A1)

Rear Sling Swivel Stud for early generation AR15 / M16's with the rubber butt plate. Will not fit M

Retro Rifles

Colt 723 / 725 (Diemaco C8) - 14.5 inch

Reproduction Colt model 723 Carbine or model 725 as provided to Canada as early model C8. Uses corr

AR15 / M16 / M4 - Selector Switch - "Dimple" or "Flat"

The Original AR15 / M16 models (601 and 602) had a selector switch with a dimple. All later models d

"F" Marked - Front Sight Base - (A Frame, FSB)

 Standard Finished (Unaltered) .625 and .750 without Sling Swivel Assembly are the only items o

M16A2 Flash Hider-Phosphate

Standard A2 Flash Suppressor. Correct for all builds after approximately 1984-1988 (depending on bra

Front Sight Tools - M16A1 / M16A2 / M4 / 733 / C7 / C8

We offer 4 different AR15 / M16 / M4 Sight tools:   Original style, A1 rear, A1 front A1 F

Retro Rifles

Brown / Green - Colt Triangle Handguards (1959-1960) - AR15

Original Colt AR15 / M16 / M16A1 Fiberglass Triangular Handguards.- Reconditioned Brown or Green. W

Retro Rifles

Barrel Nut Assembly - Milspec

New Mil Spec Barrel Nut Assembly - with choice of Slip Ring or Delta Ring. All Four parts of the As

Colt

Rear Sight Flat Spring ( AR15 / M16 / M16A1 / M16A2 / M4 )

Flat Spring for the Rear Sight Assembly for all model AR15's / M16's with a carry handle flip Rear S

Retro Rifles

C7 / C8 / M16A1E1 Upper Receiver

C7 (M16A1E1) Upper Receiver. This was a "transitional" model since it had a Shell Deflector for left

Retro Rifles

Colt 733 Commando (735, C8, 6933.. movies Black Hawk Down & Heat)

In 1985 Colt returned to the original "Commando" idea, with its Model 733, essentially a modernized

Retro Rifles

Pistol Grip - "A2" - M16A2 / M4- New OD GREEN and COYOTE TAN

"A2" (M16A2 / M4) Pistol Grip. Correct for all build versions after about 1987.  Still current

Colt

Rear Sight Aperture ( AR15 / M16 / M16A1 )

Original Colt M16 Rear flip Aperture used on the AR15 / M16 / M16A1 models.. as well as all other Co

Retro Rifles

Colt GAU-5 Air Force (1965-1966)

 May take up to 12 weeks for build and ship The 10 inch barrel Colt XM177 (model 609) was esse

Retro Rifles

Colt XM177E1 / GAU-5 / CAR-15 (1965-1966)

  The 10 inch barrel Colt XM177 (model 609) was essentially a fielded prototype - and the firs

Retro Rifles

"Triangle" Charging Handle - Colt 601 / AR15 Prototypes

This is the first version of the AR-15 Charging Handle used on Armalite prototypes, the Colt 601 and

Retro Rifles

NOS COLT Slip Ring

Standard on all Colt Models from the beginning of the AR15 story in 1960 up until replacement by the

Colt

Rear Sight Windage Drum ( AR15 / M16 / M16A1/ C7 / Daniel Defense )

Rear Sight Assembly Windage Wheel for AR15 / M16 / M16A1. Also used on all Colt models using the AR1

Colt

Rear Sight Roll Pin ( AR15 / M16 / M16A1)

Roll Pin holding the Rear Windage Drum of the AR15 / M16 / M16A1 in place. Will not work on M16A2 S

Retro Rifles

Rifle Buffer Assembly ( AR15 / M16 / M16A1 / M16A2 / M16A3 / M16A4)

Rifle Buffer Tube Assembly for all Rifle length AR15 / M16 / M16A1 / M16A2 / M16A3 / M16A4 models.

Retro Rifles

M16A2 / M4 - Closed End Muzzle Device - Banned States - 308 / 300 Blackout / 5/8x24

This is offered for States with a "Pinky Test".. meaning "Muzzle Brakes" are acceptable whereas a "F

Colt M16A1 Buttstock - Trap Door

Original US Military Buttstock with Trap Door. Used, in good condition.   1960's Vietnam era

Retro Rifles

Colt 603 - XM16E1 - "We Were Soldiers" (1963-1967)

The Colt 603 XM16E1 is the last version of the "experimental" series before official adoption of the

Non "F" Marked - Front Sight Base (A Frame, FSB)

NON F .750 is currently on back order. Expecting Late Spring 2024   Standard Finished (Unalte

M16A2 Flash Hiders

Standard A2 Flash Suppressor. Correct for all builds after approximately 1984-1988 (depending on bra

Forward Assist - All 4 types

All 4 types of Forward Assists used by the US military: Teardrop (1963-1982) Large Round- Modifi

Retro Rifles

Colt M16A2

Reproduction Standard US Military issue M16A2 fully assembled Upper Receiver assembly. Exact Model

Larry Vickers Colt 723

Larry Vickers Colt 725. Built to his exact specification (minus the flashlight). Since there is no

Retro Rifles

14.7 inch Barrel - 1:7 Twist

This is one of the hardest Barrels to find.. and so many different Builds can be made with this Barr

Retro Rifles

12.7 inch Barrel - 1:7 Twist

This is one of the hardest Barrels to find.. and so many different Builds can be made with this Barr

Lock Ring & Castle Nut (Rare, Hard to find)

Used to tighten the Carbine Buffer Tube to the Lower Receiver, the US Military has used two differen

Retro Rifles

Buffer - Carbine - 10 Options

Standard Carbine Buffer for Sliding Stock Colt models. We offer two Categories of Buffers: "Common/

Retro Rifles

M16A2 / M4 Rear Sight Aperture (Flip)

This is the correct flip Aperture for all Colt models starting with the M16A2 onward. This would inc

Retro Rifles

Colt GAU-5A/A US Air Force (1967-1970)

May take up to 12 weeks for build and ship   In 1966, the Army decided it wanted a slightly l

Retro Rifles

Carbine Handguards- 6 hole, 7 hole, M4

  CAR-15/ XM177  6 Hole Handguards: New reproductions of original round Car-15 handguard

Retro Rifles

CAR-15 stock ONLY - Aluminum Assembly / XM177/ Commando/ AR-15 SP1 Sporter

This is the Sliding Stock used on almost all Carbine models during the Vietnam War and into the late

Retro Rifles

Lock Washer / Peel washer / Crush washer

The US Military has used three different types of washers to keep a muzzle device in place: .223/

Retro Rifles

CAR-15 stock - Aluminum Assembly / XM177/ Commando/ AR-15 SP1 Sporter

This is a reproduction of the Aluminum sliding stock for the XM177, 1970's model Commandos and AR-15

Retro Rifles

M16A1 Birdcage Flash Hiders

The A1 Birdcage flash hider replaced the 3 Prong on all M16 rifles in 1967, and continued to be used

Retro Rifles

Colt Triangle Handguards - (1960-1967) "Gloss" - AR15 / M16

Original Colt AR15 / M16 / M16A1 Fiberglass Triangular Handguards reconditioned in the early Black c

Retro Rifles

Grenade Ring - XM177E2 / GAU-5 A/A

In 1966 Colt sent about 3,000 10 inch barrel XM177E1's to Vietnam. By January of 1967 the Army had d

Retro Rifles

Colt Triangle Handguards - (1967-1984) "Matte" Black - AR15 / M16 / M16A1

Original Colt AR15 / M16 / M16A1 Fiberglass Triangular Handguards reconditioned in the later Black c

Colt

Colt Rear Sight Assembly - AR15 / M16 / M16A1 / 733 / C7 / C8

Original Colt complete Rear Sight Assembly for all Colt AR-15 / M16 / M16A1 models before the introd

Retro Rifles

Colt Triangle Handguards - Original 1960's Fiberglass - AR15 / M16 / M16A1

Original Colt AR15 / M16 / M16A1 Fiberglass Triangular Handguards.   2 Finish Options: Ori

Retro Rifles

Colt "Bakelite" Pistol Grip - AR15 / M16 / M16A1

These are early Colt production m16 Pistol Grips that have changed color over the 50-60 years since

Retro Rifles

20" Pencil Barrel - AR-15 / XM16E1 / M16 / M16A1

  This "Pencil" profile barrel is the same size and finish as the original AR-15, XM16E1, 

Colt

Colt Matching Furniture Set - AR15 / M16 - Original 1960's

Original Colt AR15 / M16 / M16A1 Fiberglass & Bakelite Furniture Sets from the Vietnam War Era.

Retro Rifles

20" Pencil Barrel Build Your Own Kit- AR-15 / XM16E1 / M16 / M16A1

THIS IS A BUILD YOUR OWN KIT. Nothing will be assembled.   This "Pencil" profile barrel is t

Retro Rifles

11.5 inch M4 Barrel - 1:7 NATO - Nitride

  All configuration are in stock now.. except "non-F" FSB models, which are currently backorde