Standard AR15 / M16 Buffer retainer spring
Can be used with any Milspec semi or full auto hammer.
Standard AR15 / M16 Buffer retainer spring
Can be used with any Milspec semi or full auto hammer.
Trigger Spring for all USGI model AR15 / M16 models. Note: Both Semi and Full Auto Triggers use the
Disconnector Spring for all standard AR15 / M16 trigger group disconnectors. Will work in Semi or fu
Standard AR15 / M16 Hammer Spring. Can be used with any Milspec semi or full auto hammer.
Retro Rifles
Flat Wire Buffer Spring Will work in both Carbine and Rifle Length Systems 17-7 Stainless Steel
Retro Rifles
Rifle Buffer Tube (Receiver Extension) for all fixed Rifle Stock versions of the AR15 ( M16 /
Disconnector Spring for all standard AR15 / M16 trigger group disconnectors. Will work in Semi or fu
Retro Rifles
Standard USGI Mil Spec sized Buffer Tubes (Receiver Extension). Available choices: 2 position&nb
Full Auto Sear Pin for the M16 Auto Sear (not included). This is for the pin only. Steel
Standard Milspec AR15 (Semi Auto) and M16 (Full Auto) Triggers. Used in the AR15, M16, M16A1, M16A3
Fire Control Group only for M16 Trigger Hammer Selector Switch Auto Sear Sear pin Di
The original M16 had about a 13.25" length-of-pull. The M16A2 had a Butt Stock about an inch longer
Buttstock Screws for all generations of the AR15 / M16 / M16A1. The original AR15 / M16 (with the R
Standard Stainless Steel AR15 / M16 Gas tubes. Four Sizes available, based on Gas Port leng
Trigger Spring for all USGI model AR15 / M16 models. Note: Both Semi and Full Auto Triggers use the
The Original AR15 / M16 models (601 and 602) had a selector switch with a dimple. All later models d