Rear Sling Swivel Roll Pins
There are Two Roll Pins used in the Rear Sling Swivel Assembly:
- One is longer and goes through the Butt Stock and Swivel Stud and affixes the assembly to the stock
- One is shorter and used to hold the Sling Swivel in the Stud
** These pins is very slightly oversized vs. the stock part used in kits. Some fitting may be necessary.
** This page if the for Roll Pins only; no other sling swivel assembly parts are included.
Steel
Made in the USA
Lifetime Guarantee
2 Styles to attach you front sling swivel: Rivet-Which requires special tool to shape it Roll Pi
Rear Sling Swivel Stud for early generation AR15 / M16's with the rubber butt plate. Will not fit M
Colt
Roll Pin holding the Rear Windage Drum of the AR15 / M16 / M16A1 in place. Will not work on M16A2 S
Colt
Original Colt M16 Rear flip Aperture used on the AR15 / M16 / M16A1 models.. as well as all other Co
Colt
Screw for the M16 Rear Sight Assembly. Only the Screw is included here on this page. Correct for u
Colt
M16 Rear Sight Spring. Correct for use in AR15 / M16 / M16A1. This is the Spring that sits under th
Colt
Detent for the Rear Sight Assembly for all model AR15's BEFORE the M16A2. This would include AR15 /
Colt
Flat Spring for the Rear Sight Assembly for all model AR15's / M16's with a carry handle flip Rear S
Colt
Rear Sight Assembly Windage Wheel for AR15 / M16 / M16A1. Also used on all Colt models using the AR1
