Tip for Ar15 / Carbine buffer
Tip for Ar15 / Carbine buffer
Retro Rifles
Standard Carbine Buffer for Sliding Stock Colt models. We offer two Categories of Buffers: "Common/
Retro Rifles
Mil-Spec Carbine Buffer Spring for all sliding stock variants. Made in the USA Lifetime Gu
Retro Rifles
Rifle Buffer Tube Assembly for all Rifle length AR15 / M16 / M16A1 / M16A2 / M16A3 / M16A4 models.
Retro Rifles
Rifle Buffer Tube (Receiver Extension) for all fixed Rifle Stock versions of the AR15 ( M16 /
Retro Rifles
Flat Wire Buffer Spring Will work in both Carbine and Rifle Length Systems 17-7 Stainless Steel
Retro Rifles
Standard Carbine Buffer for Sliding Stock Colt models. We offer two Categories of Buffers: "Common/
Retro Rifles
Standard USGI Mil Spec sized Buffer Tubes (Receiver Extension). Available choices: 2 position&nb
Retro Rifles
C7 (M16A1E1) Upper Receiver. This was a "transitional" model since it had a Shell Deflector for left
Retro Rifles
AR15 / AR 10 buffer weights 3 options: Aluminum .22 OZ Steel .64 OZ Tungsten 1.5 OZ
All 4 types of Forward Assists used by the US military: Teardrop (1963-1982) Large Round- Modifi
Retro Rifles
We offer 5 different versions of the CAR-15 "Moderator" muzzle device. The first three choices are a
Handguard Caps hold the front of the two pieces of the handguard to the barrel assembly. (The rear o
Retro Rifles
New Mil Spec Barrel Nut Assembly - with choice of Slip Ring or Delta Ring. All Four parts of the As
Retro Rifles
The US Military has used three different types of washers to keep a muzzle device in place: .223/
Weldon Spring for Barrel Nut Assembly. The other 3 parts of the Barrel Nut Assembly: Slip
Retro Rifles
THIS IS A BUILD YOUR OWN KIT. Nothing will be assembled. This "Pencil" profile barrel is t
Retro Rifles
In 1966, the Army decided it wanted a slightly longer barreled version of the XM177E1, 11.5 inches i