Parts

Retro Rifles

Banned State Duck Bill Flash Hiders (1960-1983) 223/ 5.56

The first Model AR15 (Model 601) had what is often called a "Duck Bill" Flash Suppressor. It was the

Retro Rifles

Banned State 3 Prong Flash Hiders (1960-1983) 223/ 5.56

The first Model AR15 (Model 601) had what is often called a "Duck Bill" Flash Suppressor. It was the

Retro Rifles

Duck Bill Flash Hiders (1960-1983) 223/ 5.56

The first Model AR15 (Model 601) had what is often called a "Duck Bill" Flash Suppressor. It was the

3.5 inch Flash Hider Moderator Hybrid

3.5 inch moderator 1/2 x 28 basically a reduced size/weight moderator that can be used a variety of

Steyr MPI 69/81 32 Round Magazine - New Old Stock

Steyr MPI 69/81 32 Round Magazine - New Old Stock   shipping prohibited to States with magazi

Front Sling Swivel Rivet or Roll Pin ( AR15 / M16 / M16A1)

2 Styles to attach you front sling swivel: Rivet-Which requires special tool to shape it Roll Pi

M16 Gas Tube PINS- All models AR15 / M16

Standard Stainless Steel AR15 / M16 Gas tubes.   Will Work on: Rifle length Mid-length C

Economy M16 A1 Cleaning Kit Pouch Reproduction

Just the pouch no cleaning kit with it. Poor Reproduction. So bad we just want them gone

M16 A1 Cleaning Kit Pouch Reproduction

Just the pouch no cleaning kit with it. Good Reproduction

Surplus Earplugs

Colors and Sizes: Blue- Single Flange Vietnam Era- Large Orange- Triple Flange - Medium Turquoi

Meprolight Night Sight Front Sight Post AR-15 Tritium Green Dot

Meprolight Night Sight Front Sight Post AR-15 Tritium Green Dot with front sight detent. For use wit

6.5 Grendel Extractor Stripped

Type a description for this product here...

6.8 Cal SPC II Extractor Stripped

Type a description for this product here...

AR15 Cam Pin- Phosphate and Nickel Boron

AR15 Cam Pin Nickel Boron Phosphate

AR15/AR10 Bolt Carrier Key Screw Nickel Boron

Nickel Boron Bolt Carrier Key Screw. Works on AR15 or AR10

AR15/AR10 Bolt Carrier Key

AR15/AR10 Phosphate Bot Carrier Key

Retro Rifles

M16 Bolt Carrier Group (BCG) - Nitride with Mag Phosphate Bolt Assembly

 Phosphate finish Looks and shoots just like the original - Authentic for all M16 platform bui

5.5 inch Flash Hider Moderator Hybrid

5.5 inch moderator 1/2 x 28 Steel Made in US Phosphate Finish    

Retro Rifles

NOS COLT Slip Ring

Standard on all Colt Models from the beginning of the AR15 story in 1960 up until replacement by the

4.3" 607 Moderator / Blast Forward -Aluminum

4.3" Aluminum Moderator / Blast Forward No slots Black Anodized Hollowed Ultra Light Weight

Retro Rifles

Flat Buffer Spring- Rifle and Carbine

Flat Wire Buffer Spring Will work in both Carbine and Rifle Length Systems 17-7 Stainless Steel

Retro Rifles

M16 Bolt Carrier Group (BCG) - Phosphate

 Standard Mil Spec M16 Bolt Carrier Group   Bolt made from 9310 Steel Phosphate Finis

AR15 / M16 Selector detent spring

Standard AR15 / M16 Selector detent spring Can be used with any Milspec semi or full auto hammer.

AR15 / M16 Bolt catch detent spring

Standard AR15 / M16 Bolt catch detent spring Can be used with any Milspec semi or full auto hammer.

AR15 / M16 Buffer retainer spring

Standard AR15 / M16 Buffer retainer spring Can be used with any Milspec semi or full auto hammer.

AR15 / M16 Pivot pin detent spring

Standard AR15 / M16Pivot pin detent spring Can be used with any Milspec semi or full auto hammer.

Retro Rifles

Rifle Buffer

Standard Rifle buffer.

Retro Rifles

Carbine Buffer Tube / Receiver Extension - Mil Spec

Standard USGI Mil Spec sized Buffer Tubes (Receiver Extension). Available choices: 2 position&nb

Bushmaster

Bushmaster - A2 / M16A2 Pistol Grip

"A2" (M16A2 / M4) Pistol Grip Made by Bushmaster Has F3 or 4F as marking on inside. Comes with p

M16A2 Flash Hider-Phosphate

Standard A2 Flash Suppressor. Correct for all builds after approximately 1984-1988 (depending on bra

Polymer Trigger Guard with Pin - Bushmaster

Polymer trigger Guard with pin  

Bushmaster

Charging handle Spring - Bushmaster

Charging handle spring

Bushmaster

Bolt Catch Roll Pin - Bushmaster

5.56/.223 Bolt Catch Roll Pin 3/32" x 1/2"

Magazine Catch Assembly

Includes Magazine catch, Magazine Catch Spring, and regular size magazine catch.

Bushmaster

Magazine Catch Spring - Bushmaster

Magazine catch Spring

Bushmaster

Magazine Catch - Bushmaster

Will Fit Ar15 / Ar10

Bushmaster

.625 Gas Block Flat Top with Bayonet Lug and Swivel point

Made in USA  .625 Gas Block Flat Top with Bayonet Lug and Swivel point

Bushmaster

Hammer/ Trigger Pin - Bushmaster

AR15 TRIGGER OR HAMMER PIN .155 One pin for the AR-15 hammer or trigger Made in USA

.750 Low Profile Gas Block

Features 4140 Hardened Steel Nitride Coated Comes with set screws and roll pin   Made

Extended Magazine Catch Button

Features Milspec 6061-T6 aluminum Weighs .05 OZ Length is .51" (regular size is .31") Made

Magazine Catch Button

Features Milspec 6061-T6 aluminum Weighs .05 OZ length is .31" (extended magazine catch button

Ambidextrous Charging Handle

  Ambidextrous 7075 Aluminum construction   

AR15 Spring Kit

Spring Kit: Hammer Spring Trigger Spring Disconnector Spring Pivot pin detent spring (2) Sele

Retro Rifles

Buffer Retainer- Phosphate Black

AR15 Buffer Retainer - Black Phosphate  

Retro Rifles

Buffer Tip- Blue

Tip for Ar15 / Carbine buffer  

Retro Rifles

Buffer Weight- 3 Different Weights

AR15 / AR 10 buffer weights 3 options: Aluminum .22 OZ Steel .64 OZ Tungsten 1.5 OZ

Barrel Extender - 9mm - 4.5 inch - (1/2 x 28)

Our 5.56 / .223 Barrel Extenders are so popular we attempted to make the same thing in a version wit

Ejection Port Cover Hinge Pin

Ejection Port Cover hinge pin. This is the long rod that support the assembly. Rod & c-clip onl

Ejection Port Cover Hinge Spring

Ejection Port Cover Hinge Spring. Spring only, no other parts included.   Made in the USA L

Ejection Port Cover Door

Ejection Port Cover Door. Door only, no other parts included.   New Black color Steel Mad

Ejection Port Cover Assembly

Ejection Port Door Assembly. This is the complete parts set for the Assembly. Includes: Door S

End Plate

Standard Milspec End Plate.   Steel Made in the USA Lifetime Guarantee

Colt 607 Rear Handguard Cap

The Colt 607 was the first attempt at making a submachine gun version of the M16 rifle. Few were mad

M16A2 / M16A3 / M16A4 Rifle Stock Spacer - Mil spec

The original M16 had about a 13.25" length-of-pull. The M16A2 had a Butt Stock about an inch longer

Barrel Nut Snap Ring

Mil Spec Barrel Nut Snap Ring (One of Four parts comprising the Barrel Nut Assembly).   The o

Weldon Spring

Weldon Spring for Barrel Nut Assembly.   The other 3 parts of the Barrel Nut Assembly: Slip

Rear Sling Swivel Roll Pin ( AR15 / M16 / M16A1)

Rear Sling Swivel Roll Pins There are Two Roll Pins used in the Rear Sling Swivel Assembly: - One

Rear Sling Swivel Stud ( AR15 / M16 / M16A1)

Rear Sling Swivel Stud for early generation AR15 / M16's with the rubber butt plate. Will not fit M

Retro Rifles

M16A2 / M4 Rear Sight Aperture (Flip)

This is the correct flip Aperture for all Colt models starting with the M16A2 onward. This would inc

Colt

Rear Sight Flat Spring ( AR15 / M16 / M16A1 / M16A2 / M4 )

Flat Spring for the Rear Sight Assembly for all model AR15's / M16's with a carry handle flip Rear S

Colt

Rear Sight Roll Pin ( AR15 / M16 / M16A1)

Roll Pin holding the Rear Windage Drum of the AR15 / M16 / M16A1 in place. Will not work on M16A2 S

Colt

Rear Sight Screw ( AR15 / M16 / M16A1)

Screw for the M16 Rear Sight Assembly. Only the Screw is included here on this page. Correct for u

Colt

Rear Sight Spring ( AR15 / M16 / M16A1)

M16 Rear Sight Spring. Correct for use in AR15 / M16 / M16A1. This is the Spring that sits under th

Colt

Rear Sight Detent ( AR15 / M16 / M16A1)

Detent for the Rear Sight Assembly for all model AR15's BEFORE the M16A2. This would include AR15 /

Colt

Rear Sight Aperture ( AR15 / M16 / M16A1 )

Original Colt M16 Rear flip Aperture used on the AR15 / M16 / M16A1 models.. as well as all other Co

Colt

Rear Sight Windage Drum ( AR15 / M16 / M16A1/ C7 / Daniel Defense )

Rear Sight Assembly Windage Wheel for AR15 / M16 / M16A1. Also used on all Colt models using the AR1

Retro Rifles

Rifle Buffer Tube ( AR15 / M16 / M16A1 / M16A2 / M16A3 / M16A4)

Rifle Buffer Tube (Receiver Extension) for all fixed Rifle Stock versions of the AR15  ( M16 /

Retro Rifles

Rifle Buffer Assembly ( AR15 / M16 / M16A1 / M16A2 / M16A3 / M16A4)

Rifle Buffer Tube Assembly for all Rifle length AR15 / M16 / M16A1 / M16A2 / M16A3 / M16A4 models.

Forward Assist Roll Pin ( All Forward Assist models)

Forward Assist Roll Pin for all version assists (Teardrop, Large round, current Small Round, etc.)

Forward Assist Spring - ( All Forward Assist models )

Forward Assist Spring for all version assists (Teardrop, Large round, current Small Round, etc.) &n

Retro Rifles

Phantom Style Flash Hider - for AK47

Phantom style flash hider for AK-47. The Phantom style flash hider was made popular by YHM in the 1

Retro Rifles

Phantom Style Flash Hider- 2 types - for AR-15 / M16 / 5.56 / .223 / 12x28

The Phantom style flash hider was made popular by YHM in the 1980's - making it one of the earliest

Retro Rifles

Multi-hole Muzzle Device - 3.5" - AR15 / 5.56 / .223 / 1/2x28

Multi-Hole Muzzle Device for AR-15   * This device does not require Timing and can use any ty

Retro Rifles

Retro Flare style Flash Hider - AR15 / M16 / 5.56 / .223 / 1/2x28

Retro Flared Flash Suppressor. Similar in style to many 1970/1980's flash hiders.   * This mu

Retro Rifles

Retro Flared Flash Hider - 308 / 300 blackout / 5/8x24

Retro Flared Flash Suppressor. Similar in style to many 1970/1980's flash hiders.   * This mu

Retro Rifles

M16A2 / M4 - Closed End Muzzle Device - Banned States - 308 / 300 Blackout / 5/8x24

This is offered for States with a "Pinky Test".. meaning "Muzzle Brakes" are acceptable whereas a "F

Retro Rifles

Beehive Closed End Muzzle Brake - 308 / 300 blk / 5/8x24

Closed End Muzzle Break for 308 / 300blk. Holes all the way around - coupled with a tight constrict

Retro Rifles

Multi-Hole Muzzle Device - 3.5" - 308 / 300 Blackout / 5/8x24

Multi-Hole Muzzle Device for 308 / 300blk   * This device does not require Timing and can use

Retro Rifles

Phantom Style Flash Hider - 308 / 300 Blackout / 5/8x24

Phantom Style Flash Hider for 308 / 300Blk. The Phantom style flash hider was made popular by YHM i

Retro Rifles

Duck Bill & 3 Prong Flash Hiders - 308 / 300 blk / 5/8x24

A number of different Flash Hiders were tried on the original AR10 Here are Two of the more popula

Retro Rifles

Barrel Nut Assembly - Milspec

New Mil Spec Barrel Nut Assembly - with choice of Slip Ring or Delta Ring. All Four parts of the As

Sling Swivel - Front and Rear - All USGI Colt Models

Front and Rear Sling Swivel for all US Military models of the AR15 / M16 platform.   Notes on

Retro Rifles

Pistol Grips Screws - 4 Options - Flat & Hex head

Pistol Grip Screws The Standard USGI spec for this Pistol Grip Screw is 1 inch. We always thought

AR15 / M16 Hammer Spring

Standard AR15 / M16 Hammer Spring. Can be used with any Milspec semi or full auto hammer.

Front Handguard Cap - 5 Styles

Handguard Caps hold the front of the two pieces of the handguard to the barrel assembly. (The rear o

Buttstock Screw

Buttstock Screws for all generations of the AR15 / M16 / M16A1. The original AR15 / M16 (with the R

Rear Sling Swivel Assembly - for early Rubber Buttpad Stocks (Colt model 601, 602, 604)

Sling Swivel Assembly for AR15 / M16 with original Rubber Buttpad Buttstock. ** These will not work

Retro Rifles

M4 Flat Top Upper Receiver - Keyhole Forged

 Standard Milspec flat top upper receiver. Appropriate for any "flat top" military build. 2 O

M16 Gas Tubes - All models AR15 / M16

Standard Stainless Steel AR15 / M16 Gas tubes.   Four Sizes available, based on Gas Port leng

Standard Charging Handle - Milspec - 7075 USA

Standard Milspec Charging Handle.   7075 Aluminum Type 3 Anodizing Made in the USA Lifetim

Auto Sear PIN - M16 - Full Auto

Full Auto Sear Pin for the M16 Auto Sear (not included). This is for the pin only.   Steel

Disconnector Spring - AR15 / M16

Disconnector Spring for all standard AR15 / M16 trigger group disconnectors. Will work in Semi or fu

Trigger Spring - AR15 / M16 / M4

Trigger Spring for all USGI model AR15 / M16 models. Note: Both Semi and Full Auto Triggers use the

AR15 / M16 / M4 - Selector Switch - "Dimple" or "Flat"

The Original AR15 / M16 models (601 and 602) had a selector switch with a dimple. All later models d

AR15 / M16 Disconnector

We offer Two different Disconnectors: Semi Auto Full Auto This page is for the Disconnector o

AR15 / M16 Trigger

Standard Milspec AR15 (Semi Auto) and M16 (Full Auto) Triggers. Used in the AR15, M16, M16A1, M16A3

AR15 / M16 Hammer

AR15 or M16 Hammer (Choose from the Pull Down Menu above) If you also need a Hammer Spring (Here)

M16 Auto Sear, with Spring

Standard M16 Auto Sear, with Spring. As used in the Full Auto AR15, M16, M16A1, M16A3, M4, Mk18, Mk

Retro Rifles

M16A2 / M4 "Square" Front Sight Post - "Short" or "Tall"

M16A2 Front Sight Post. Also known as an "A2" or "M4" Post (depending on which height) This Post co

Tuneable Muzzle Break - Ultra Light - 5.56 / .223 / 1/2x28

This is an interesting option for advanced level shooters who want to dial in the exact Blast/Compen